|
|
|
Note:
The Series Number identifies coil construction only. Units are available
in all 2-way and 3-way flow patterns, body materials, voltages,
and external configurations |
| Series
200-Spade Terminals |
|
|
|
|
| The
Series 200 Solenoid Valve is a low cost lightweight, compact size
valve featuring two 1/4 inch spade terminations, external yoke and
molded coil for maximum protection and insulation. The unit is available
in all flow patterns, a magnetic latching option is offered, and Series
200 actuators can be used to pilot larger valves or for manifold mounting.
Shown with brass valve body. |
|
| Series
300-Conduit (female) |
|
|
|
|
The
Series 300 Solenoid Valve features a coil can with a 1/2 inch NPT
internally threaded hub designed to accommodate conduit or fittings
required for hard wiring. Other features include 18 inch long, 18
gauge leads and epoxy encapsulated coil for protection and insulation.
The Series
300 is available in all flow patterns and as an "actuator only"
for manifold mounting or to pilot larger valves.
|
|
| Series
400-Wire Leads |
|
|
|
|
| The
Series 400 Solenoid Valve is a low cost, lightweight, compact size
valve featuring 18 inch long, 18 gauge leads, external yoke, and molded
coil for maximum protection and insulation. The unit is available
in all flow patterns. Magnetic latching (in both 2 and 3 wire) is
an option. "Actuator only" units can be used to pilot larger
valves or for manifold applications. |
|
| Series
500-Conduit (male) |
|
|
|
|
The
Series 500 Solenoid Valve features a unique coil design (patent
# 5311162) with 1/2 inch external threads to accommodate a variety
of fittings used for hard wiring or panel mount applications. Other
features include 18 inch long, 18 gauge leads, external yoke, and
molded coil for maximum protection and insulation. |
|
| Series
1000-Epoxy Filled |
|
|
|
|
| The
Series 1000 Solenoid Valve is an epoxy filled, plastic cannister valve.
This design is excellent for use in high humidity and applications
where exposure to the elements is a factor. The unit is available
in all flow patterns and as an "actuator only" to pilot
larger valves or for manifold applications. |
|
| Series
1200-Plastic Can |
|
|
|
|
The
Series 1200 Solenoid Valve is a lower cost version of the Series 1000
available only as a 2-way normally closed with a glass filled polypropylene
body. Although electrical characteristics are basically the same,
the Series 1200 features a glass filled nylon cannister and base nut. This
design also offers an option of private labeling for the high volume
user. Electrical specifications, company logos, part numbers, etc.
can be molded into the flat space on the side of the cannister.
|
|
| Series
1300-DIN Terminals |
|
|
|
|
| DIN
43650 mini (11mm) terminal configuration molded coil. Class-A and
available in 2-way & 3-way with brass, s.s., and plastic valves.
Compact size with mounting holes in the valve or with optional mounting
bracket. |
