FLOW CONTROL

Adjustable flow (metering) solenoid valves are designed for use in applications where flow adjustment is required.

Units are available in the 2-way, normally closed flow pattern only.

Note: All Series actuators are available with the Adjustable Flow Valve. The Series Number identifies coil construction only.

Standard Data-Adjustable Flow Valve
Electrical

Voltages Available:
AC 50/60 Hz - 12, 24, or 120 volts
DC - 6, 12, or 24 volts
DC Latching - 9, 12, 18, or 24 volts


Coil Construction:
Units available with all ECI Series actuators



 Materials

Seals:
Nitrile, Fluoroelastomer, or EPDM


Internal Components:
Stainless Steel


Valve Body Material:
Glass Filled Polypropylene		 Flow Configurations

Maximum Flow:
2.5 GPM (H20) @ 100 psi (.125 orifice)


Minimum Flow:
90% shut-off (depending on viscosity of media)
Note: Mounting bracket and/or
mounting holes not available.
All dimensions in inches.
Add dimensions to appropriate series valve.