| Note:
The Series Number identifies valve body only. Units are available
as normally open or normally closed with choice of solenoid operator.
(See: Diaphragm Operation) |
|
| SERIES
953-954. 3/4"& 1" PORT |
|
|
|
|
ECI's
3/4" and 1" port solenoid plastic control valves
are designed to allow maximum water flow over a wide range of pressures.
The internal diaphragm allows smooth opening and closing, preventing
problems with surge hazards and water hammer. All units are available
with or without the flow control stem. Available in normally closed
or open. Use any 1/8" NPT solenoid to operate. (Shown with Series
1200 solenoid) |
|
|
|
|
|
| SERIES
985-994. 3/8" 1/2" & 3/4" PORT |
|
|
|
|
ECI's
miniature, 3/8" & 1/2"port plastic control valves are
low cost, reduced profile, solenoid piloted valves for applications
requiring flow up to nine gallons per minute. The internal diaphragm
allows smooth opening and closing preventing problems with surge hazards
and water hammer. Available as normally closed or open. Use with any
1/8" NPT solenoid to operate. (Shown with Series1200 solenoid)
|
|
|
|
|
|
| MAGNETIC
LATCHING |
|
|
|
|
| Available
for all diaphragm valves. Allows for low power consumption using a
pulse of DC voltage to activate/deactivate solenoid operator. |
|
|
|
